×
Before: dried glue squeeze-out and dust where the longeron meets the bulkhead skin.
×
Before: a row of dried glue drops along the edge of a stringer.
×
After: the same stringer, sanded clean.
×
The cleaned-up junction between stringer and cross member.
×
Close-up of the sanded stringer; the grain is clean again.
×
Wider view of the same area after sanding.
×
Before: glue drops and pencil marks on the laminated stringers.
×
After: the laminated stringers sanded clean at the bulkhead.
×
After: another view of the cleaned stringers.